Volcano
Volcano
There are 20 L and 10 L options.
Where applicable:
Visokotemperaturna tekuća toplinska izolacija “TERMION VOLCANO” koristi se kada je potrebno izvesti izolaciju:
- Gas transmission system
- For metal chimneys
- Product (technological) pipeline
- Engine components
- Ship's machinery and hull components
- Roof metal structures
- Piping systems, boilers, tanks, and other structures
- Hot water pipelines
Termion Volcano se nanosi na površine koje mogu biti pod utjecajem temperaturnih ekstrema od -60°C do +600°C i otporne su na agresivne medije poput naftnih derivata, soli i mineralnih ulja.
Metalne površine tretirane termalnim premazom Termion Volcano bit će bez korozije, a industrijska oprema s visokom radnom temperaturom zaštitit će radnike od toplinskih opeklina.
Termion Volcano na organskoj bazi sadrži 80% mikrogranula od staklokeramike “3M” (Francuska), 20% specijalnih aluminijskih pahuljica i reološke aditive.
Principle of operation:
The viscous fraction, which consists of a high-quality imported binder (dispersion), contains air-filled microspheres of glass-ceramic with low thermal conductivity, ultraviolet filters, rheological additives, and corrosion inhibitors.
When applied to metal surfaces, the coating polymerizes, covering the surface with a film of vacuum-coated ceramic microspheres and forming a thermal barrier.
Method of application:
- Before applying the coating, mix thoroughly by hand or with a mechanical mixer (speed up to 200 revolutions per minute).
- Requirements for the surface to which thermal insulation is applied: dry, firm, and clean (free of grease, dirt, and dust)
- Ne preporučuje se nanošenje Termion Volcano-a na obojene površine.
- Use a roller, brush, or airless sprayer for application.
- The ambient temperature during application should be between +7°C and +40°C.
- Apply the coating to the metal surface in 2–3 layers, allowing up to 24 hours between each drying stage (drying time depends on the ambient air temperature).
- Coating drying occurs after 48 hours under natural conditions at a temperature of 20°C.
- Complete material recrystallization occurs during in-service heating.
Price on request
- Roof waterproofing
- Waterproofing of foundations
- Pool waterproofing
- Waterproofing for floors
- Waterproofing of roads
- Waterproofing for floors
