Winter

There are 20-liter and 10-liter options.

Where it is applied:

Ultra-thin liquid thermal insulation “TERMION WINTER” enables work with the material in winter at temperatures from +10 °C to –30 °C. This is the only liquid thermal insulation coating suitable for such weather conditions.

Termion Winter Organic-based, contains 80% 3M (France) microglass-ceramic granules, ultraviolet filters, and other rheological additives.

The material prevents freezing, condensation, and icing on piping and gas lines. It is used for heating walls, facades, balconies and loggias, attics and basements, basement floors, panel joints, roofs, and other metal structures.

Liquid thermal insulator Termion Winter can be compared to conventional enamels (in terms of application), but the micro-granules of glass-ceramics with trapped air inside make it an excellent thermal barrier, due to its very low coefficient of thermal conductivity.

Thinner, for Termion Winter, can be xylene or orthoxylene.

Liquid insulator Termion Winter has excellent adhesion properties, water resistance, resistance to alkaline environments, and applicability to various types of substrates.

Method of application:

Before applying the coating, mix thoroughly by hand or with a mechanical mixer (speed up to 200 revolutions per minute).
Requirements for the surface to which thermal insulation is applied: dry, firm, and clean (free of grease, dirt, and dust)
It is not recommended to apply Termion Winteron colored surfaces.
Use a roller, brush, or airless sprayer for application.